Easycontact S10

« Pour le sommaire
Easycontact S10
​​Product description
Zettex Easycontact S10 is a quick-drying universal contact adhesive applied using a brush or roller. Zettex Easycontact S10 is suitable for most materials in construction and industry. This Easycontact S10 is applied with a brush or a roller. Besides the Easyontact S10 is DCM-free.

Material
SBR rubber

Advantages
• Quick-drying
• Extremely powerful
• High solid substance content
• For universal use
• Ready to use
​​Available form
• Drum 1 KG, 2.5 KG, 5 KG , 10 KG, 25 KG, 50 KG, 200 KG and 1000 KG

Colour
• Transparent or red. 
​​Uses
• For the adhesion of all kinds of carpeting, cork, linoleum, insulation material and rubber.

Application instructions
• Dry the materials to be adhered and remove dust and grease. This can be done with Zettex Profireinger. Then carefully apply the contact adhesive using a brush or a roller. Preferably apply the adhesive rows without overlapping. After 2-4 minutes adhere both surfaces to each other and firmly press or roll. When there is overlapping the open time must at least be doubled. With very porous surfaces carefully check whether there is sufficient contact between both adhesive layers. Apply an extra layer if this is required. 
Propriété Spécification
Processing temperature +5 to +40 degrees
Temperature resistance -40°C to +55°C
Télécharger le fichier TDS Poser une question

Poser une question

Rappelez-moi

Rappelez-moi