D3 Wood D3 Wood Adhesive

« Pour le sommaire
D3 Wood D3 Wood Adhesive
​​Product description
Zettex D3 is a universal solvent-free, water-resistant ready-to-use wood adhesive for interior and exterior applications.

Material
PVAC

Advantages
• Water-resistant
• Suffices with regard to Watt 91
• Universal use for construction and surface adhesion.
• Apply with a brush, adhesive comb, adhesive roller or glue gun (pressure vessel)
• Pressing with gluing clamps, hot and cold pressing
• Environmentally friendly and cost-saving with a wide range of packaging.
• Can be painted over
​​Available forms
• Bottle 250 g
• Bottle 750 g
• Bucket 2.5 kg
• Bucket 5 kg
• Bucket 10 kg
• Bucket 25 kg
• IBC 1100 kg 
​​Application instructions
Zettex D3 is suitable for all kinds of construction joints such as dowels, tongues, swallow tails and pin and hole joints. Zettex D3 is also for example suitable for assembly adhesion, facade boards, doors, ladders and garden furniture. Zettex D3 wood adhesive is also suitable for gluing applications in bathrooms and kitchens

Zettex wood adhesives are suitable for gluing a wide range of woods. Examples include hard, soft and exotic wood types. The wood adhesives also glue veneer and hard synthetic boards, chipboard, plywood, MDF, hardboard and many more wood materials. A condition for gluing is that at least one of either surface is porous.

Both sides of the surface must be dry and free of dust and grease. The adhesive must be briefly stirred beforehand, after which the adhesive is evenly spread on one side with for example a brush, adhesive comb, adhesive roller or glue gun. If both sides are porous apply the adhesive on both sides. Adhesive can be diluted 3% with water. Immediately remove wet glue residues with Zettex Profireinger. Hardened glue residues can be mechanically removed.
Propriété Spécification
Basis PVAC
Solid substance content 50%
Specific gravity +- 1.1 g/cm3
pH Value 25 ℃ 3
Min. Processing temperature +10 ℃
Colour original White
Colour dry Transparent
Odour Odourless
Components number 1
Temperature resistance -20 to 80 degrees
Frost resistance According to NEN-EN 204 D3
Open time Maximum of 10 minutes
Amount required Approximately 125-250 g/m2
Shear strength 110 kg/cm2
Télécharger le fichier MSDS Poser une question

Poser une question

Rappelez-moi

Rappelez-moi